RESOLVED (1) to grant planning permission subject to: (a) the inclusion of the indicative conditions listed in the draft decision notice, save the amendment of condition 5 to: the tree protection measures detailed in the approved Arboricultural Method Statement shall be put in place prior to the commencement of the development hereby permitted, and retained for the duration of construction operations. The development shall be carried out in accordance with any on-going requirements set out in the approved Arboricultural Method Statement; (b) the following additional conditions with regard to badgers: the development shall not be commenced until details of additional measures to ensure that badgers which may be using the site are properly protected, have been submitted to and approved in writing by the Local Planning Authority; the development shall be carried out in accordance with the approved scheme; Reason: to ensure that the development would preserve or enhance the health of protected species in the vicinity to comply with Policy NE3 of the Nottingham Local Plan and Policy 17 of the Aligned Core Strategy (2) for the p ower to determine the final details of the conditions to be delegated to the Head of Planning. It is noted that one member voted against the application, whilst two councillors abstained.
Word for word from the decision Nottingham published for this meeting.Source: committee.nottinghamcity.gov.uk
Application No: 16/00149/PFUL3 for planning permission
Application by: Bond Bryan Architects Ltd on behalf of The University Of Nottingham
Proposal: Advanced Manufacturing Building comprising offices, teaching space, laboratories and workshops. Associated external works and new scout hut.
The application is brought to Committee because it relates to a development on a prominent site where there are important design and heritage considerations.
To meet the Council's Performance Targets this application should be determined by 28th April 2016.
Recommendations
GRANT PLANNING PERMISSION subject to the indicative conditions listed in the draft decision notice at the end of this report.
Power to determine the final details of the conditions to be delegated to the Head of Development Management.
Background
3.1The site is located on the north side of Derby Road, immediately to the east of Lenton Lodge, which is a Grade II* listed building.
3.2Until recently the eastern portion of the site was occupied by a two storey office and workshop building and associated parking and service areas. The western side the site also includes a single storey timber scout hut surrounded by a grassed open space and mature trees.
3.3To the north the site is bounded by the southern end of the University of Nottingham Jubilee campus. To the north-east the site is bounded by workshop and industrial buildings on Triumph Road. To the south east the site is bounded by a stretch of the exposed River Leen which then enters a culvert as it passes south west through the site and under Derby Road. To the east is the Rose and Crown Public House. The western boundary abuts an area of woodland and Lenton Lodge. Directly opposite on the south side of Derby Road is a parade of local shops. 3.4 On the west side of the site is a water pump and iron railings which are both Grade II listed.
4 DETAILS OF THE PROPOSAL
4.1Planning permission is sought by the University of Nottingham for a new academic and research building known as the Advanced Manufacturing Building (AMB). This will create a central hub for manufacturing related activities which are currently dispersed to a number of University buildings. It is also proposed to construct a replacement scout hut as the existing hut on the site would be directly affected by the redevelopment proposals.
4.2The AMB is proposed to be a three storey building with a gross internal floor area of 9000 sq m which would be sited on the eastern side of the site. The accommodation to be provided comprises two basic elements –workshop space and academic office accommodation. Reflecting this the building is made up of two linked elements, referred to as the ribbon block and the workshop block. The ribbon block forms the western and southern side of the building and would house the academic office accommodation, meeting rooms and collaboration space. The workshop block is to the east and would house flexible workshop and laboratory spaces.
4.3Both blocks would have a dark brickwork plinth interspersed with full length narrow windows. The ribbon block is proposed to be clad in a metal rainscreen cladding system which is golden in colour, whilst the workshop block would be a dark/black standing seam metal cladding system. The western elevation of the ribbon block includes varying fenestration which increases towards the southern end. The south elevation is primarily glazed and is conceived as a “shopfront” to the building.
4.4The scout hut is proposed to be located to the west of a new access road. It would be constructed primarily from black stained timber cladding with the entrance defined by natural finished timber cladding.
Read every report as text, not just the decision
Pro opens the officer report behind each decision, searchable and quotable, across every council we cover.
Station Street, Nottingham, NG2 3NGResolved (1) To grant planning permission for the reasons set out in the report, subject to: (a) The indicative condi...
We use a cookie to keep you signed in and run your free-paper allowance, and an optional one to count visits. You can accept all, or choose. Privacy & cookies
Necessary
Keeps you signed in and runs your free-paper allowance. Always on.
Always on
Analytics
Counts visits and which pages are used. First-party only, no advertising, never shared.