That planning permission be GRANTED subject to the following conditions:- 1) The southernmost portion of the turning head to the rear of Block B shall be hatched with "keep clear" markings or other similar measures, in accordance with a scheme that shall be submitted to and approved writing by the Local Planning Authority prior to the first occupation of Block B or Block D. The approved details shall be maintained as such thereafter. To ensure suitable provision for the turning of refuse vehicles, in accordance with policy EN1 of the Sevenoaks District Local Plan. 2) The development hereby permitted shall be carried out in accordance with the following approved plans: 5827 01C, 10D, 11D, 12D, 13B, 14C, 15C, 16C, 17E, 18A, 19 21C, 22C, 23C, Bir.4175_01 and Bir.4175_02 For the avoidance of doubt and in the interests of proper planning. 3) The material samples required under condition 4 of SE/11/02471 shall include a sample panel measuring a minimum of 300mm x 300mm in area of the timber ... view the full minutes text for item 20.
Word for word from the decision Sevenoaks published for this meeting.Source: cds.sevenoaks.gov.uk
PROPOSAL: Reserved matters (Access, Appearance, Landscaping, Layout and Scale) pursuant to condition 2 of SE/11/02471/OUT - Proposed demolition of the former police station and erection of up to approximately 52 residential units.
LOCATION: Former Sevenoaks Police Station, Morewood Close, Sevenoaks KENT TN13 2HX
WARD(S): Sevenoaks Kippington
ITEM FOR DECISION
Councillors Eyre and Hunter have referred the application to Development Control Committee for the reasons specified in the main report.
RECOMMENDATION: That planning permission be GRANTED subject to the following conditions:-
1) The southernmost portion of the turning head to the rear of Block B shall be hatched with "keep clear" markings or other similar measures, in accordance with a scheme that shall be submitted to and approved writing by the Local Planning Authority prior to the first occupation of Block B or Block D. The approved details shall be maintained as such thereafter.
To ensure suitable provision for the turning of refuse vehicles, in accordance with policy EN1 of the Sevenoaks District Local Plan.
2) The development hereby permitted shall be carried out in accordance with the following approved plans: 5827 01C, 10D, 11D, 12D, 13B, 14C, 15C, 16C, 17E, 18A, 19 21C, 22C, 23C, Bir.4175_01 and Bir.4175_02
For the avoidance of doubt and in the interests of proper planning.
3) The material samples required under condition 4 of SE/11/02471 shall include a sample panel measuring a minimum of 300mm x 300mm in area of the timber cladding to be used in the external elevations of the development, and shall demonstrate how the individual timbers will join with one another, and details of any staining proposed to the timber cladding.
To ensure a satisfactory appearance to the development, in accordance with Policy SP1 of the Sevenoaks Core Strategy and Policy EN1 of the Sevenoaks District Local Plan.
Informatives
1) The refuse bins that are depicted on the approved plans appear to be 1,100L wheeled bins, and if so each refuse storage area has the required no. of bins. The 1,100L bins must be of the drop-front variety as outlined in the Sevenoaks District Council guidance to developers. Further, the bins should be allocated as follows:
(Item No 4.1) 1 a. Refuse Block A: 3 bins for general waste (black sacks) & 3 bins for recyclable waste (clear sacks and large cardboard)
b. Refuse Block B: 2 bins for general waste (black sacks) & 2 bins for recyclable waste (clear sacks and large cardboard)
c. Refuse Block C: 2 bins for general waste (black sacks) & 2 bins for recyclable waste (clear sacks and large cardboard)
d. Refuse Block D: 1 bin for general waste (black sacks) & 1 bin for recyclable waste (clear sacks and large cardboard)
2) The surfacing materials for the access and roadways hereby approved and as shown on the plans, shall be constructed to accommodate the weight of a 26 tonne refuse collection vehicle.
3) You are advised that the drainage details required as part of condition 12 of the outline planning permission remain outstanding and will need to be subject to a separate details submission.
4) Any gate installed on the boundary between the dry access route to Block D and the adjacent public footpath must be designed to open inwards into the site, to avoid obstruction of the public footpath.
Update
Read every report as text, not just the decision
Pro opens the officer report behind each decision, searchable and quotable, across every council we cover.
We use a cookie to keep you signed in and run your free-paper allowance, and an optional one to count visits. You can accept all, or choose. Privacy & cookies
Necessary
Keeps you signed in and runs your free-paper allowance. Always on.
Always on
Analytics
Counts visits and which pages are used. First-party only, no advertising, never shared.