Resolved
That the application be approved subject to the conditions outlined in the report and the following additional conditions and informatives: 1 1. Notwithstanding any proposed materials specified on the approved drawings or in the application form submitted with the application, samples of the external materials to be used shall be submitted to and approved in writing by the Local Planning Authority prior to the commencement of the development. The development shall be carried out using the approved materials. Reason: So as to achieve a visually acceptable appearance. 2. Prior to the commencement of the works hereby approved cross sections, profiled and details at a scale 1:10 of:- a. Envelope of service tower, including glazed connections and roof link; b. Eaves detail of new floor; c. Flashings and any other modification to existing parapet; d. Windows and window systems; e. External and internal doors; f. Internal partitioning systems and any suspended ceilings; Large scale details of:- a. Details of cycle enclosure; b. Details of waste compound; c. Details of internal and external servicing ductwork, pipes and equipment. shall be submitted to and approved in writing by the Local Planning Authority prior to the commencement of the development. The approved details shall be carried out in accordance with the approved details. Reason: To retain the character of the Listed Building and so that the Local Planning Authority may be satisfied with these details. 3. All new wall partitions should be scribed around existing details. Reason: To protect the internal fabric and features of the listed building. 4. Prior to the commencement of work and not withstanding the hereby approved details, additional details of the roof shall be submitted to the Local Planning Authority for written approval. The development shall then be carried out in strict accordance with the written approved details. Reason: To retain the character of the Listed Building and so that the Local Planning Authority may be satisfied with these details. Informative At present the roof pitch proposed is 20 ° , it is considered that a reduction in the pitch of the roof by 5 ° to 15 ° would reduce the height of the proposed roof of the additional floor by approximately 400-500mm and give the appearance of the roof being flatter from the more distant views. 5. The two existing doors within the end elevation (adjacent to the main factory building) shall be retained. Reason: To retain the character of the ... view the full minutes text for item 52b