Resolved
- Application deferred pending a site visit.
Planning & Development Committee deferred this item on Wednesday 19 August 2015. Below is the council's own wording, with the papers it was decided on.
Resolved
- Application deferred pending a site visit.
BL BL
Roof tiles to match existing
GENERAL SPECIFICATION - All works are to comply with the current Building Regulations, British Standards and Codes of Practice referred to herein but not specifically The works shall be carried out to the full satisfaction of the local authority Building Control Officer, Approved inspector or other body including submission of all necessary notices and payment of All products referred to on the drawing and this specification are to be used strictly in accordance with the manufacturer's Before starting any works, all site conditions and dimensions are to be checked and verified by the builder and any discrepancies reported to the Allow to supply and fix/apply all new finishes/fittings to match existing unless otherwise specified, eg. doors/frames, windows, door and window furniture, skirtings, architraves, dado/picture rails All softwood used in a structural capacity to be FSC or PEFC certified, min C16 grade (to BS 5268 pt 2, 1991) unless otherwise specified. Rendered finish above facing STRUCTURAL DESIGN - Construction specification to be read in conjunction with any structural calculations relating to project. brickwork plinth to match existing ELECTRICS - All electrics to be wired in accordance with latest IEE Regulations. Power outlets and light fittings to be located as directed by applicant. Efficient lighting to be provided in new building/extension/alterations with at least 75% of the total of all new light fittings to have a luminous efficacy greater than 45 lumens per circuit-watt. Fixed external lighting to be controlled via. sensors which automatically turn off lights when not required and when there is sufficient daylight. Each external light fitting should not have a lamp capacity exceeding 150W. All electrical work required to meet the requirements of Part P (Electrical Safety) must be designed, installed, inspected and tested by a registered person competent to do so. Prior to completion PROPOSED FRONT ELEVATION 1:100 PROPOSED SIDE ELEVATION 1:100 the Council should be satisfied that Part P has been complied with. This will require an appropriate BS 7671 electrical installation certificate to be issued for the work by a registered person competent to do so.
Pro opens the officer report behind each decision, searchable and quotable, across every council we cover.
PDF |
Item 4: 15-00587Report | 161 KB | DownloadRead as text |
PDF |
PD/15/05 Item 4: Application IP/15/00587/FULReport | 191 KB | Download |
Follow Planning & Development Committee at Ipswich and we tell you when its next papers are published, before the meeting rather than after it.
| Meeting | Decision | Outcome | |
|---|---|---|---|
| 29 Jul 2026 | Unconfirmed Minutes of Previous Meeting - 1 July 2026that the Minutes of the meeting held on 1 July 2026 be signed as a true record. | Decided | Open |
| 29 Jul 2026 | To Confirm or Vary the Order of Businessthat the Order of Business be confirmed as printed on the Agenda. | Decided | Open |
| 29 Jul 2026 | PD/26/03 Information for Councillors, including Planning Enforcement Updatethat the information for Councillors be noted. | Noted | Open |
| 1 Jul 2026 | Unconfirmed Minutes of Previous Meetingthat the Minutes of the meeting held on 3 June 2026 be signed as a true record. | Decided | Open |
| 1 Jul 2026 | To Confirm or Vary the Order of Businessthat the Order of Business be confirmed as printed on the Agenda. | Decided | Open |
We use a cookie to keep you signed in and run your free-paper allowance, and an optional one to count visits. You can accept all, or choose. Privacy & cookies
Keeps you signed in and runs your free-paper allowance. Always on.
Counts visits and which pages are used. First-party only, no advertising, never shared.